Aquael Parts

This round nylon bristle brush is ideal for cleaning inside most magnetic drive pumps with removable rotor/impeller. The bristles are designed to remove algae buildup ...

This wide intake strainer attaches to the intake and prevents gravel and other debris from entering and clogging the filter. It's wider frame and body filters more eff...

The pipe assembly consists of two individual pipes with tubing connectors. This is connected with a threaded plastic screw that both holds the assembly to the aquarium...

A replacement UV (ultraviolet) fixture for use with the Aquael Unimax 150. Kills algae and other harmful pathogens. To be used in conjunction with the 5 watt bulb (sol...

A replacement UV (ultraviolet) fixture for use with the Aquael Unimax 250 and 500. Kills algae and other harmful pathogens. To be used in conjunction with the 9 watt b...

A heavy duty, smoke color, vinyl tubing specifically for the Aquael Unimax 150 and 250 canister filters.

Inlet/ pipe extensions are used on both the intake and discharge of the Aquael Unimax 500/700 filter and are identical.

This canister catch (or, "clip and hinge") keeps the motor attached and tightly sealed to the canister filter. Fits all models of the Aquael Unimax canister filters. T...

The filter media magazine, or baskets, are extremely luxurious compared to other canister filters. Big and sturdy, these baskets carry more media than most canister fi...

This is a one-piece sprinkler assembly, or spray bar that securely attaches to the discharge tube. The spray bar discharges water into the aquarium more slowly than th...

These miniature bio-balls break down organic waste in your filter and also creates oxygen for better aeration.

A replacement canister for the Unimax 150. DOES NOT include the clips/hinges.

A replacement canister for the Unimax 500.DOES NOT include the clips/hinges.

A replacement canister for the Unimax 700. DOES NOT include the clips/hinges.

The Main Gasket, or "canister O-ring" completes the seal between the motor and the filter canister. Air bubbles or canister leaking are signs you need to replace this ...

The Unimax control unit contains the integrated inlet/outlet system for the filter. The unit is removed by swiveling the handle to unlock the unit which releases the c...

This is the original factory replacement of the rotor/impeller assembly for the Aquael Unimax 500 and 700. It does not include the shaft and rubber bearing. The rotor ...

These cover the chambers that house the rotor impellers within your filter's motor ("complete cover"). Fits the Unimax 500 and 700 canister filters.

The motor that covers the top of the Unimax 500 and 700. This does not include the control unit, or the rotor impeller assembly.

The filter media magazine, or baskets, are extremely luxurious compared to other canister filters. Big and sturdy, these baskets carry more media than most canister fi...

Diaphragm for all Aquael Oxyboost pump. Easy to change requires only a screwdriver and takes about 5 minutes. Diphragms should be replaced every year or sooner if you ...

Valve Block/Flow Control for Aquael Oxyboost 100. Replace valve block and diaphragm to bring the pump back orignal pressure and volume. One way valves and diaphragms w...

Valve Block/Flow Control for Aquael Oxyboost pumps 150/200/300. Replace valve block and diaphragm to bring the pump back orignal pressure and volume. One way valves an...

Replacement motor with new UV LEDS. Replace when motor stops working or LEDS begin to fade. Does not include a new rotor/impeller.