Rena Filstar XP Parts

This round nylon bristle brush is ideal for cleaning inside most magnetic drive pumps with removable rotor/impeller. The bristles are designed to remove algae buildup ...

This pre-filter foam is approximately 2-1/4" Diameter by 6" Length. The inner diameter measures 1-1/8" and will fit over many aquarium intake tubes for use as a pre-fi...

This pre-filter foam is approximately 2-1/4" Diameter by 7" Length. The inner diameter measures 1-1/4" and will fit over many aquarium intake tubes for use as a pre-fi...

This product is no longer available separately. It is include with XP Rotor Impellers. The stainless rotor shaft for the Rena Filstar XP filters rarely needs replacing...

The shaft bearing/bushing is located in the bottom of the rotor well and in the center of the impeller cover. It is rarely replaced and has nothing to do with the spee...

The SmartHeater unviversal connection kit allows the SmartHeater to be used with other brands of external filters and replaces the intake tube supplied by the manufact...

Replacement tubing for the Rena XP Filters consists of two, 6.5 foot lengths. These are the original tubes that come with the XP4, but will also fit the XP1, XP2 and X...

Additional SmartFilter inlet extensions can be used to increase the intake length for use in deeper tanks.

The Rubber feet on the Rena XP Filstar filters stabilizes the filter base and dampens any sound from filter operation. Over time these feet will loose elasticity and s...

The basket lid seals the bottom of the motor to the top of basket assembly. This insures that water flowing from the aquarium will flow through the baskets from the bo...

The basket separation grid when used, makes two filtration media chambers from one basket. This results in smoother flow of water through the filter, more contact time...

The outlet pipe connects the flexible tubing exiting from the filter to the outlet accessories which terminate with either the spraybar or power jet nozzle. This outle...

The power jet nozzle is used to direct the water discharged from the filter onto the water's surface. This increases agitation and aeration in the tank for better oxyg...

840135-00-Priming-Funnel-9-or-P The priming funnel is used on initial setups to prime the system for startup. It is only needed for the initial setup and when the inle...

840138-00 Suction Cup Clamps (4pk) (L) These brackets attach (clamp) to the inlet/outlet tubes and coupled with the large suction cups will hold the inlet/outlet pipe ...

The Quick Disconnect (QD) unit contains the integrated inlet/outlet system for the filter. The unit is removed by lifting the handle which releases the connection to t...

The flow control valve for the Rena Filstar XP canister filter regulates the flow from the filter into the aquarium. This is a simple "flapper valve" that when turned ...

Original replacement motor for the Rena Filstar XP1 and includes a canister O ring and impeller cover seal . It does not include the Quick Disconnect Unit or rotor/imp...

The Rena Filstar XP impeller cover caps the area containing the rotor/impeller and fixes one end of the rotor shaft to stabilize the rotor/impeller. The other end of t...

The Rena Filstar XP Canister clip/hinge seals the motor to the top of the canister. This prevents water leaks from the filter. The clips exert positive pressure on the...

Replacement tubing for the Rena XP Filters consists of two, 5 foot lengths. These are the original tubes that come with the XP1, XP2 & XP3. They will also fit the XP4....

This is the seal on the bottom of the motor that prevents water from the aquarium bypassing the filter material. It is a strip of sealing material that fits in the gro...

The item 861500-02 version of the canister replacement for the Rena Filstar XP3 external canister filter consists of the outer canister, rubber feet and clips. To avoi...

Replacement suction cups for all XP Filter systems made after 2003. Includes suction cups only. No Clips.

These are the original suction cups and clips (KeyCodes K&L)that come packed in the trays with new XP filters. Now packed in a convenient 6 pack (6 cups, 6 clips).